Rod Review – Airrus Rods September 2007

Over the years, I have been fortunate to have the opportunity to personally use and test many brands and types of rods. Each one is unique in its own way and has its own character. I have used many fine rods such as St. Croix, G. Loomis, Kistler, Daiwa, Shimano and Lamiglas. About five years ago I was introduced to a company called Sirrus Rods, now known as Airrus Rods. The company was just starting out and there weren’t too many models to choose from, but due to their incredible technological advances and perseverance, they have since become a world class company and have many models and types of rods available. Folks, I’ll warn you, these rods will blow your mind! Let me share with you some of my recent experiences with Airrus rods. I really hope this serves as a guide and helps you with your next new rod purchase.

Airrus Achievements:

Co-Matrix 457 Rods…….ICAST 2002 “Best of Show” Rod Category

Outdoor Life…………2003 “Editors Choice” Award for Best Baitcast Rod.

Spectra ATF Rods….ICAST 2003 “Best of Show” Rod Category

Tradition rods ……….. ICAST 2004 “Best of Show” rod category

Field & Stream………..2004 Tradition Rod was selected #1 in 2004.

Puls-R Rod ……………..ICAST 2006 “Best of Show” Freshwater Rod

Airrus CO-MATRIX 457 rod

Airrus Rods has always been at the forefront of technology and this is extremely evident in

each and every one of the models of their rods. The first rod I would like to share information about is the

Co-Matrix 457. The rod I tested was a 7′ medium heavy fast action casting rod. I used the new

Ardent XS 1000 reel with 15LB-Berkley fluorocarbon line. The Co-Matrix not only has an abundant

amount of energy, but it is also extremely sensitive. This rod is unique in the fact that two different

Manufacturing processes were used in this rod. This is how Airrus describes this process…

“Filament winding, which is used in the lower section of the rod to provide maximum hook setting and

moldability and our patented Multi-Modulus tip section, designed to provide the best combination

of lure presentation, rod control and sensitivity”. This combination of rod and real allowed me to make

incredibly long cast and still keep accuracy a priority, as well as control. I was using a 5″ weightless

stick worm and allow it to sink and then bring it back to the surface for repeated

process. The Co-Matrix was so sensitive that it could feel every piece of structure that was

here. This is what an MH 7′ rod should feel like in my opinion! The problem is that, to many already heavier

power rods feel like, well… long, heavy power rods, which aren’t very conducive to all-day fishing

excursion.

I found this rod to be very well balanced right out of the box. But, in case you can be

using a heavier spool or a lighter spool than the one you were using, Airrus has put a removable nylon cap on the stock

bar section so weight can be added to ensure proper balance is achieved. I’ll say

From the beginning, the people at Airrus have thought of everything and put it to use in their

rod alignment. The handle of the wand is unlike any I have ever seen. Airrus calls it the “Comfort

“Grip” handle. The handle incorporates high quality Portuguese cork and a material called Hypalon.

The Hypalon section is located right where the hand rests on the rod handle and is the most sensitive and

comfortable material that I have experienced. Airrus uses Fuji Hardloy guides with “Concept” spacing

and a Fuji ECSM graphite filled Nylon 6 reel seat which is a deadly combination when it comes to

sensitivity. The Co-Matrix retails for between $94.95 and $125.95 depending on the model you buy.

choose. It is available in casting, spinning, flip & pitch and crankin’ models. There are 19 models in the

baitcast series and 11 models in the spinning series. In my opinion, this rod will keep up with any rod.

on the market it costs twice as much!

Airrus SPECTRA ATF rod

The next Airrus rod I tried was the Spectra ATF spinning rod in the 7′ medium power fast action.

model. Within minutes I could definitely see why Airrus won “Best of Show” in 2003 at the

ICAST Show with this rod. It is an extremely precise and sensitive rod. This rod contains another

Airrus technological breakthrough called “Selective Sensitivity”. Airrus is the first company to use

multifiber filament winding to a raw bar with the addition of spectra fiber to the filament winding

matrix in the lower section of the raw bar. When they added wraith fiber to the matrix, they were

able to dampen vibrations, which affect casting distance and accuracy, as well as increase the rods

sensitivity. This may sound very technical to you and believe me, it is. You can actually see the

difference in the internal construction of an Airrus rod through the paint! This is the kind of technology

that has made me a true fan of Airrus. The ATF was a fairly light feeling rod, but had a lot of backbone

to do the job. This rod was combined with the new Ardent S-400M spinning reel with PLine Halo

in the 10LB test and the distance achieved during the throw was phenomenal. She was throwing 4″ stick worms

madly rigged with this setup. I also put this rod to the test by using it as a drop-shot platform and releasing

the weight on the line up to the 6LB test. I was very impressed with the way the Spectra ATF

performed on both stages! The Spectra ATF also uses the high grade “Comfort Grip” system

Portuguese cork and Hypalon, but also has a removable 4″ Hypalon stock extension that comes with the

rod. Once again, the Hypalon is positioned right where your hands rest for maximum comfort and sensitivity.

When you add the back section on the rod, this allows you to cast your lure even further using the

Two-handed launch method for added leverage. The nylon cap is also built into this rod to

weight and balance purposes and the Spectra AFT uses Fuji Alconite guides in “Concept” spacing

as well as. The actual seat provided increased sensitivity as Airrus uses Fuji ECSM exposed blank seats. I

i would put this rod up against ANY rod on the market and the amazing part is the one time cost of the rod

$149.95. I have paid more than double that amount for rods that were far inferior to Spectra ATF. Tea

The Spectra series consists of 5 casting models and 3 spinning models to suit your fishing needs.

Airrus PULS-R rod

The next rod in the Airrus family that I had the pleasure of testing was the Puls-R series. It’s nice

The deep maroon color had me starring on this rod for some time before I even put a reel on it. Attention

The craftsmanship that Airrus puts into each and every rod in each series is simply amazing. one does

You won’t find this kind of quality anywhere else. I found that the Puls-R series went even one step further

and once again Airrus has developed a totally new concept in rod construction. Carlos at Airrus Rods

would explain the process as such, “The Puls-R is the ultimate in high performance composite rods from

Airrus and represents a rod built with the latest generation multifiber filament winding.

combined with the latest advances in Nano Tube carbon fiber epoxy resin systems. This is the most

definitely the best of both worlds in one rod. It also happened to be the most sensitive rod I’ve ever owned

ugly my hands on. At the bottom of the rod blank, graphite fibers are combined with a new S2

fiberglass at the rate of one fiberglass for each fiber and a half of graphite. I tried the 6’9″

Medium Heavy Power with quick tip on the casting model. Pair the Puls-R with the Brand New

Ardent C400 baitcaster (holy smokes!!!) with 12 LB PLine Halo, strapped to a spinnerbait and off to

fish.

The first thing I noticed was the incredible sensitivity reflected through the handle. You

Look, this rod does not use material like cork or Hypalon in the shaft like the aforementioned rods do.

The Puls-R rod handle is a full contact grip that internally merges with the blank. It’s like you’re holding

on the megaphone end of a one-piece unit. It was like he was holding a custom made bar that was made

only for me! I could feel every turn of the spinnerbait’s blade and every piece of frame as it slowly moved forward.

winding the spinnerbait. The Puls-R had a very fast and responsive tip, but a lot of backbone when

he set the hook and wrestled the 5 1/2LB largemouth out of a thick bed of weeds. The Puls-R is by far the

The most “pristine” rod I have ever used! To make things even more exclusive and personalized, Airrus uses a

patented split reel seat to ensure maximum contact between rod and hand, as well as locking wraps on the

single foot guides. The guides they use on the Puls-R are super hard and light with double stamping.

guides with inserts and TiCA frame, which means your inserts will no longer fall out or crack.

The Puls-R is available in 5 casting models and 3 spinning models. The rod retails for $249.99, which

it is an absolute steal for the quality and craftsmanship that the Puls-R possesses. The rod is a bit

than I expected, but it was NOT a problem as it balanced extremely well. There are 5 cast

models available and 3 rotary models to best suit your applications.

I really can’t think of anything negative to say about the Airrus line of bars. I am aware of

this is a product review but these rods are really amazing! I cannot offer advice because these good people

at Airrus they have mastered rod construction to a futuristic level. The only small detail is that some models are

slightly than expected, but that wasn’t a problem at all considering the clever balance system

Airrus has incorporated it into the butt section of their rods. Below are some details that stand out in my

mind as real positives regarding the Airrus line of rods.

1. Incredible attention to detail.

2. Unrivaled craftsmanship.

3. The latest and greatest cutting edge technology combined in one revolutionary fishing rod.

4. Beautiful flawless cosmetics.

5. Gigantic casting distance is achieved through the Airrus series of rods.

6. Very affordable! Less than half the price of competitors with an inferior product!

7. The most pristine and responsive rods I’ve ever gotten my hands on. Each of all Airrus rods

8. Makes you feel like you’re using a custom made rod.

9. A plethora of models available to fit any budget, technique, style or fishing situation.

admin

Related Posts

fallback-image

Are Electronics Boards Suitable For High-Speed Applications?

fallback-image

What are the key factors affecting the flexibility of a rf circuit board?

fallback-image

How Does Fast Turn Circuit Board Assembly Contribute to Cost Savings?

fallback-image

Controlled Impedance in Flexible PCB Boards

No Comment

Leave a Reply

Your email address will not be published. Required fields are marked *