How to remove that stubborn hubcap when you’re on the side of the road

Many of the older vehicles on the road today still use hubcaps, while newer cars tend to use wheel covers that are secured in a different way. In addition to the extreme frustration that will likely follow your new discovery of a flat tire, removing a hubcap can be a real headache. Unfortunately, removing that stubborn hub cap is also the first step in the process of steps required to remove a wheel to change a flat tire. However, they are often not as difficult to remove as you might initially think.

Step 1: Use a screwdriver or the blade end of a lug wrench as a prying tool against the edge of a hubcap. It is often necessary to pry around the edge of the hubcap in several different places to completely remove it from the rim. You’ll want to create leverage by pushing toward the edge of the wheel, driving the tip of the screwdriver or wrench against the inside of the hub cap. It may take a few more seconds to slowly remove the hubcap by prying along different areas of the hubcap, but it will greatly reduce the chances of breaking the hubcap and greatly increase the chances that it will not. slam the heel violently. hand against her in frustration. Imagine lifting the lid off a paint can.

Step 2: Once you’ve removed the cap, make sure to turn it upside down so you can use it as a tray to hold your nuts or bolts. The reason for this is simple. There is nothing that can ruin your day as fast as getting your nuts kicked and falling down a sewer drain. So don’t just use the bucket lid as a container or tray for your nuts, but put it in a place where it won’t get hit or stepped on.

And there you have it. Tried and true hubcap removal that is sure to get you back on the road as quickly and safely as possible.


Related Posts

The Cheapest Reliable Used Cars You Can Buy

What are the main problems in heavy truck repair and how to solve them?

Honda bikes

Recycling of electric car batteries

No Comment

Leave a Reply

Your email address will not be published. Required fields are marked *